Filter by:
-
CSA ACIC Armoured Fieldbus/Profibus PA | Pairs (300/600V)
Read moreCSA ACIC Armoured Fieldbus/Profibus PA | Pairs (300/600V)
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
CSA ACIC Armoured Thermocouple Extension | Pairs (300V)
Read moreCSA ACIC Armoured Thermocouple Extension | Pairs (300V)
Shawflex Thermocouple Extension cables offer advantages in cost and mechanical properties when used for connections between thermocouples and instruments.
-
CSA ARMCON Armoured Control | Multi-Conductor (600V)
Read moreCSA ARMCON Armoured Control | Multi-Conductor (600V)
Unshielded armoured control cable is used for operation of control automation equipment. Interlocked armour replaces the use of conduit for mechanical protection. Cable can be directly buried, installed in raceways, including cable tray in wet or dry environments. Cable is suitable for use in outdoor exposed applications and is rated for damp or dry locations in -40°C (-40°F) environments.
-
CSA Armoured VFD AIA | Multi-Conductor (1000V)
Read moreCSA Armoured VFD AIA | Multi-Conductor (1000V)
ShawFlex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors.
Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor / outdoor and ladder-type cable trays in wet / dry locations and are applicable in Industrial and Processing facilities.
-
CSA Riser TECK 90 Armoured Mineshaft | Multi-Conductor Shielded (5000V)
Read moreCSA Riser TECK 90 Armoured Mineshaft | Multi-Conductor Shielded (5000V)
Riser TECK 90 cables are designed for vertical applications to prevent cable core slippage and are suitable for use in mineshaft and for environments that require self-supporting lengths. Typically used in Mining, Utilities, Industrial and Commercial applications.
-
CSA Riser TECK 90 Armoured Mineshaft | Multi-Conductor Unshielded (1000V)
Read moreCSA Riser TECK 90 Armoured Mineshaft | Multi-Conductor Unshielded (1000V)
Riser TECK 90 cables are designed for vertical applications to prevent cable core slippage and are suitable for use in mineshaft and for environments that require self-supporting lengths. Typically used in Mining, Utilities, Industrial and Commercial applications.
-
CSA Riser TECK 90 Armoured Mineshaft | Multi-Conductor Unshielded (5000V)
Read moreCSA Riser TECK 90 Armoured Mineshaft | Multi-Conductor Unshielded (5000V)
Riser TECK 90 cables are designed for vertical applications to prevent cable core slippage and are suitable for use in mineshaft and for environments that require self-supporting lengths. Typically used in Mining, Utilities, Industrial and Commercial applications.
-
CSA Safe-T-Ground | Green/Safe-T-Stripes | Single Conductor (1000V)
Read moreCSA Safe-T-Ground | Green/Safe-T-Stripes | Single Conductor (1000V)
Tray Control cables are suitable for use in ventilated, non-ventilated and ladder type cable trays, direct burial, raceways and for exposed or concealed wiring in wet, damp or dry locations in -40°C (40°F) environments. Applicable for use in Utilities, Industrial and Commercial applications.
-
CSA Unarmoured Tray Fieldbus/Profibus PA | Pairs (300/600V)
Read moreCSA Unarmoured Tray Fieldbus/Profibus PA | Pairs (300/600V)
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
CSA Unarmoured Tray Thermocouple Extension | Pairs (300V)
Read moreCSA Unarmoured Tray Thermocouple Extension | Pairs (300V)
Shawflex Thermocouple Extension cables offer advantages in cost and mechanical properties when used for connections between thermocouples and instruments.
-
CSA Unarmoured Tray VFD | Multi-Conductor (1000V)
Read moreCSA Unarmoured Tray VFD | Multi-Conductor (1000V)
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. Shawflex VFD Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor / outdoor and ladder-type cable trays in wet / dry locations and are applicable in Industrial and Processing facilities.
-
CSA Utility Unarmoured Power Control | Multi-Conductor (1000V)
Read moreCSA Utility Unarmoured Power Control | Multi-Conductor (1000V)
Utility cables are the ideal choice for applications that require an extra level of durability and noise protection in Utility applications.