Filter by:
-
AREMA Signal Wire and Cable
Read moreAREMA Signal Wire and Cable
Designed specifically for transit signalling and wayside control circuit applications, Shawflex AREMA Signal Wire and Cable family are single and multiconductor, 600 V and 2000 V cables that comply with AREMA Communications and Signals Manual 10.3. Our portfolio includes armoured and unarmoured, Aerial-Type and Underground-Type AREMA Signal Wire and Cables.
-
CP-100 Transit Signal Cable
Read moreCP-100 Transit Signal Cable
Shawflex CP-100 Transit Signal Cable is a 600V polyethylene insulated and jacketed railway signal cable that can be used for aerial applications, duct installation as well as direct contact with Earth.
-
CSA ACIC Armoured Fieldbus/Profibus PA | Pairs (300/600V)
Read moreCSA ACIC Armoured Fieldbus/Profibus PA | Pairs (300/600V)
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
CSA ACIC Armoured Instrumentation | Pairs & Triads (300V)
Read moreCSA ACIC Armoured Instrumentation | Pairs & Triads (300V)
Armoured Instrumentation cables can be used to minimize noise and signal interference by preventing crosstalk between pairs and triads. This cable can also be used to convert analogue or digital signals. Tray Instrumentation cables can be installed in raceways, direct burial applications and in outdoor exposed industrial applications.
-
CSA ACIC Armoured Instrumentation | Pairs & Triads (600V)
Read moreCSA ACIC Armoured Instrumentation | Pairs & Triads (600V)
Armoured Instrumentation cables are used to convert analogue or digital signals. Used when there is a possibility for crosstalk between pairs / triads. Interlocked armour replaces the use of conduit for mechanical protection. Cables can be installed in raceways, direct burial applications and in outdoor exposed Industrial applications.
-
CSA ACIC Armoured Thermocouple Extension | Pairs (300V)
Read moreCSA ACIC Armoured Thermocouple Extension | Pairs (300V)
Shawflex Thermocouple Extension cables offer advantages in cost and mechanical properties when used for connections between thermocouples and instruments.
-
CSA ARMCON Armoured Control | Multi-Conductor (600V)
Read moreCSA ARMCON Armoured Control | Multi-Conductor (600V)
Unshielded armoured control cable is used for operation of control automation equipment. Interlocked armour replaces the use of conduit for mechanical protection. Cable can be directly buried, installed in raceways, including cable tray in wet or dry environments. Cable is suitable for use in outdoor exposed applications and is rated for damp or dry locations in -40°C (-40°F) environments.
-
CSA Armoured VFD AIA | Multi-Conductor (1000V)
Read moreCSA Armoured VFD AIA | Multi-Conductor (1000V)
ShawFlex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors.
Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor / outdoor and ladder-type cable trays in wet / dry locations and are applicable in Industrial and Processing facilities.
-
CSA LSZH ACIC Armoured Control | Multi-Conductor (1000V)
Read moreCSA LSZH ACIC Armoured Control | Multi-Conductor (1000V)
LSZH AIA Control cables are suitable for use in ventilated, non-ventilated and ladder type cable trays, direct burial, raceways and for exposed or concealed wiring in wet, damp or dry locations in -40°C (-40°F) environments. Applicable for use in Utilities, Industrial and Commercial applications.
-
CSA LSZH ACIC Armoured Control | Multi-Conductor (600V)
Read moreCSA LSZH ACIC Armoured Control | Multi-Conductor (600V)
LSZH AIA Control cables are suitable for use in ventilated, non-ventilated and ladder type cable trays, direct burial, raceways and for exposed or concealed wiring in wet, damp or dry locations in -40°C (-40°F) environments. Applicable for use in Utilities, Industrial and Commercial applications.
-
CSA LSZH ACIC Armoured Power | Multi-Conductor (1000V)
Read moreCSA LSZH ACIC Armoured Power | Multi-Conductor (1000V)
LSZH AIA Control cables are suitable for use in ventilated, non-ventilated and ladder type cable trays, direct burial, raceways and for exposed or concealed wiring in wet, damp or dry locations in -40°C (-40°F) environments. Applicable for use in Utilities, Industrial and Commercial applications.
-
CSA LSZH Unarmoured Tray Control | Multi-Conductor (300V)
Read moreCSA LSZH Unarmoured Tray Control | Multi-Conductor (300V)
LSZH Tray Control cables are suitable for use in ventilated, non-ventilated and ladder type cable trays, direct burial, raceways and for exposed or concealed wiring in wet, damp or dry locations in -40°C (-40°F) environments. Applicable for use in Utilities, Industrial and Commercial applications.
