Filter by:
-
AREMA Signal Wire and Cable
View Product: AREMA Signal Wire and CableAREMA Signal Wire and Cable
Designed specifically for transit signalling and wayside control circuit applications, Shawflex AREMA Signal Wire and Cable family are single and multiconductor, 600 V and 2000 V cables that comply with AREMA Communications and Signals Manual 10.3. Our portfolio includes armoured and unarmoured, Aerial-Type and Underground-Type AREMA Signal Wire and Cables.
-
CP-100 Transit Signal Cable
View Product: CP-100 Transit Signal CableCP-100 Transit Signal Cable
Shawflex CP-100 Transit Signal Cable is a 600V polyethylene insulated and jacketed railway signal cable that can be used for aerial applications, duct installation as well as direct contact with Earth.
-
CSA TYPE ACIC Armoured Fieldbus/Profibus PA, 300/600 V
View Product: CSA TYPE ACIC Armoured Fieldbus/Profibus PA, 300/600 VCSA TYPE ACIC Armoured Fieldbus/Profibus PA, 300/600 V
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
CSA TYPE CIC TC Tray Fieldbus/Profibus PA, 300/600 V
View Product: CSA TYPE CIC TC Tray Fieldbus/Profibus PA, 300/600 VCSA TYPE CIC TC Tray Fieldbus/Profibus PA, 300/600 V
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
CSA TYPE RW90 CIC TC Tray VFD, Multi-Conductor, 1000 V
View Product: CSA TYPE RW90 CIC TC Tray VFD, Multi-Conductor, 1000 VCSA TYPE RW90 CIC TC Tray VFD, Multi-Conductor, 1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. ShawFlex VFD Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor/outdoor and ladder-type cable trays in wet/dry locations and are applicable in Industrial and Processing facilities.
-
CSA Type TECK 90 Armoured VFD , Multi-Conductor, 1000 V
View Product: CSA Type TECK 90 Armoured VFD , Multi-Conductor, 1000 VCSA Type TECK 90 Armoured VFD , Multi-Conductor, 1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. Shawflex VFD Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor/outdoor and ladder-type cable trays in wet/dry locations and are applicable in Industrial and Processing facilities.
-
UL Tray, TC-ER, VFD, XLPE/PVC, Multi-Conductor, 600 V
View Product: UL Tray, TC-ER, VFD, XLPE/PVC, Multi-Conductor, 600 VUL Tray, TC-ER, VFD, XLPE/PVC, Multi-Conductor, 600 V
Shawflex VFD Cables are a preferred power cable for AC Drives as the Tri-sectional symmetrical bare grounds in contact with the copper tape shield greatly reduce harmonic interference ensuring smooth and safe motor operation. Permitted for Exposed Run (ER) use in accordance with NEC, reducing installation cost and time.
-
UL Type MC Armored VFD, Multi-Conductor, 600/1000 V
View Product: UL Type MC Armored VFD, Multi-Conductor, 600/1000 VUL Type MC Armored VFD, Multi-Conductor, 600/1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor / outdoor and ladder-type cable trays in wet / dry locations and are applicable in Industrial and Processing facilities.
-
UL Type PLTC / ITC Armored Fieldbus/Profibus PA, 300 V
View Product: UL Type PLTC / ITC Armored Fieldbus/Profibus PA, 300 VUL Type PLTC / ITC Armored Fieldbus/Profibus PA, 300 V
Fieldbus is the process industry’s digital replacement for analogue 4-20mA transmission of process variables. Depending on the current requirement of each device, up to 32 sensors and actuators are possible on a fieldbus link, with a maximum transmission distance of 1900m.
-
UL Type PLTC / ITC Tray Fieldbus/Profibus PA, 300 V
View Product: UL Type PLTC / ITC Tray Fieldbus/Profibus PA, 300 VUL Type PLTC / ITC Tray Fieldbus/Profibus PA, 300 V
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
UL Type TC Tray VFD, Multi-Conductor, 600/1000 V
View Product: UL Type TC Tray VFD, Multi-Conductor, 600/1000 VUL Type TC Tray VFD, Multi-Conductor, 600/1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor / outdoor and ladder-type cable trays in wet / dry locations and are applicable in Industrial and Processing facilities.
