Filter by:
-
AREMA Signal Wire and Cable
View Product: AREMA Signal Wire and CableAREMA Signal Wire and Cable
Designed specifically for transit signalling and wayside control circuit applications, Shawflex AREMA Signal Wire and Cable family are single and multiconductor, 600 V and 2000 V cables that comply with AREMA Communications and Signals Manual 10.3. Our portfolio includes armoured and unarmoured, Aerial-Type and Underground-Type AREMA Signal Wire and Cables.
-
CP-100 Transit Signal Cable
View Product: CP-100 Transit Signal CableCP-100 Transit Signal Cable
Shawflex CP-100 Transit Signal Cable is a 600V polyethylene insulated and jacketed railway signal cable that can be used for aerial applications, duct installation as well as direct contact with Earth.
-
CSA LSZH Type CIC TC Tray Instrumentation, 300 V
View Product: CSA LSZH Type CIC TC Tray Instrumentation, 300 VCSA LSZH Type CIC TC Tray Instrumentation, 300 V
LSZH Tray Instrumentation cables are used to convert analogue or digital signals. Used when there is a possibility for crosstalk between pairs / triads. Cable can be installed in raceways, direct burial applications and in outdoor exposed Industrial applications,
-
CSA RW90, Traction Power Cable 2000 V
View Product: CSA RW90, Traction Power Cable 2000 VCSA RW90, Traction Power Cable 2000 V
Shawflex Traction Power Cable are suitable for use as positive power delivery, negative return, and impedance bond cables in transit traction power system for tunnel and other below grade installations, where low smoke emission, fire retardant, and flexibility are the main concerns. It also can be installed in ventilated, non-ventilated and ladder type cable trays, especially for closed environments or populated spaces.
-
CSA Safe-T-Ground, Single Conductor, 1000 V
View Product: CSA Safe-T-Ground, Single Conductor, 1000 VCSA Safe-T-Ground, Single Conductor, 1000 V
Tray Grounding cables are suitable for use in ventilated, non-ventilated and ladder type cable trays, direct burial, raceways and for concealed wiring in wet, damp or dry locations in -40°C (40°F) environments. Applicable for use in Utilities, Industrial and Commercial applications.
-
CSA TYPE ACIC Armoured Fieldbus/Profibus PA, 300/600 V
View Product: CSA TYPE ACIC Armoured Fieldbus/Profibus PA, 300/600 VCSA TYPE ACIC Armoured Fieldbus/Profibus PA, 300/600 V
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
CSA TYPE ACIC Armoured Instrumentation, 300 V
View Product: CSA TYPE ACIC Armoured Instrumentation, 300 VCSA TYPE ACIC Armoured Instrumentation, 300 V
Armoured Instrumentation cables can be used to minimize noise and signal interference by preventing crosstalk between pairs and triads. This cable can also be used to convert analogue or digital signals. Type ACIC Instrumentation cables can be installed in raceways, cable trays, direct burial applications and in outdoor exposed industrial applications.
-
CSA TYPE ACIC Armoured Instrumentation, 600 V
View Product: CSA TYPE ACIC Armoured Instrumentation, 600 VCSA TYPE ACIC Armoured Instrumentation, 600 V
Armoured Instrumentation cables are used to convert analogue or digital signals. Used when there is a possibility for crosstalk between pairs / triads. Interlocked armour replaces the use of conduit for mechanical protection. Type ACIC Instrumentation cables can be installed in raceways, cable trays, direct burial applications and in outdoor exposed Industrial applications.
-
CSA Type ACIC Armoured Thermocouple Extension, 300 V
View Product: CSA Type ACIC Armoured Thermocouple Extension, 300 VCSA Type ACIC Armoured Thermocouple Extension, 300 V
Shawflex Thermocouple Extension cables offer advantages in cost and mechanical properties when used for connections between thermocouples and instruments.
-
CSA TYPE CIC TC Tray Fieldbus/Profibus PA, 300/600 V
View Product: CSA TYPE CIC TC Tray Fieldbus/Profibus PA, 300/600 VCSA TYPE CIC TC Tray Fieldbus/Profibus PA, 300/600 V
Fieldbus is the Process Industries digital replacement for analog 4-20mA transmission of process variables. Depending mainly on the current requirement of each device, up to 32 sensors and actuators are possible on a Fieldbus link with a maximum transmission distance of 1900m.
-
CSA TYPE CIC TC Tray Instrumentation, 300 V
View Product: CSA TYPE CIC TC Tray Instrumentation, 300 VCSA TYPE CIC TC Tray Instrumentation, 300 V
Tray Instrumentation cables can be used to minimize noise and signal interference by preventing crosstalk between pairs and triads. This cable can also be used to convert analogue or digital signals. Type TC Instrumentation cables can be installed in raceways, cable trays, direct burial applications and in outdoor exposed industrial applications.
-
CSA TYPE CIC TC Tray Thermocouple Extension, 300 V
View Product: CSA TYPE CIC TC Tray Thermocouple Extension, 300 VCSA TYPE CIC TC Tray Thermocouple Extension, 300 V
Thermocouple Extension cables offer advantages in cost and mechanical properties when used for connections between thermocouples and instruments.
