Filter by:
-
AREMA Signal Wire and Cable
View Product: AREMA Signal Wire and CableAREMA Signal Wire and Cable
Designed specifically for transit signalling and wayside control circuit applications, Shawflex AREMA Signal Wire and Cable family are single and multiconductor, 600 V and 2000 V cables that comply with AREMA Communications and Signals Manual 10.3. Our portfolio includes armoured and unarmoured, Aerial-Type and Underground-Type AREMA Signal Wire and Cables.
-
CP-100 Transit Signal Cable
View Product: CP-100 Transit Signal CableCP-100 Transit Signal Cable
Shawflex CP-100 Transit Signal Cable is a 600V polyethylene insulated and jacketed railway signal cable that can be used for aerial applications, duct installation as well as direct contact with Earth.
-
CSA RW90, Traction Power Cable 2000 V
View Product: CSA RW90, Traction Power Cable 2000 VCSA RW90, Traction Power Cable 2000 V
Shawflex Traction Power Cable are suitable for use as positive power delivery, negative return, and impedance bond cables in transit traction power system for tunnel and other below grade installations, where low smoke emission, fire retardant, and flexibility are the main concerns. It also can be installed in ventilated, non-ventilated and ladder type cable trays, especially for closed environments or populated spaces.
-
CSA Safe-T-Ground, Single Conductor, 1000 V
View Product: CSA Safe-T-Ground, Single Conductor, 1000 VCSA Safe-T-Ground, Single Conductor, 1000 V
Tray Grounding cables are suitable for use in ventilated, non-ventilated and ladder type cable trays, direct burial, raceways and for concealed wiring in wet, damp or dry locations in -40°C (40°F) environments. Applicable for use in Utilities, Industrial and Commercial applications.
-
CSA TYPE RW90 CIC TC Tray VFD, Multi-Conductor, 1000 V
View Product: CSA TYPE RW90 CIC TC Tray VFD, Multi-Conductor, 1000 VCSA TYPE RW90 CIC TC Tray VFD, Multi-Conductor, 1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. ShawFlex VFD Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor/outdoor and ladder-type cable trays in wet/dry locations and are applicable in Industrial and Processing facilities.
-
CSA Type TECK 90 Armoured VFD , Multi-Conductor, 1000 V
View Product: CSA Type TECK 90 Armoured VFD , Multi-Conductor, 1000 VCSA Type TECK 90 Armoured VFD , Multi-Conductor, 1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. Shawflex VFD Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor/outdoor and ladder-type cable trays in wet/dry locations and are applicable in Industrial and Processing facilities.
-
CSA Utility Power & Control Tray, Multi-Conductor, 1000 V
View Product: CSA Utility Power & Control Tray, Multi-Conductor, 1000 VCSA Utility Power & Control Tray, Multi-Conductor, 1000 V
Utility cables are the ideal choice for applications that require an extra level of durability and noise protection in Utility applications.
-
UL Tray, TC-ER, VFD, XLPE/PVC, Multi-Conductor, 600 V
View Product: UL Tray, TC-ER, VFD, XLPE/PVC, Multi-Conductor, 600 VUL Tray, TC-ER, VFD, XLPE/PVC, Multi-Conductor, 600 V
Shawflex VFD Cables are a preferred power cable for AC Drives as the Tri-sectional symmetrical bare grounds in contact with the copper tape shield greatly reduce harmonic interference ensuring smooth and safe motor operation. Permitted for Exposed Run (ER) use in accordance with NEC, reducing installation cost and time.
-
UL Type MC Armored VFD, Multi-Conductor, 600/1000 V
View Product: UL Type MC Armored VFD, Multi-Conductor, 600/1000 VUL Type MC Armored VFD, Multi-Conductor, 600/1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor / outdoor and ladder-type cable trays in wet / dry locations and are applicable in Industrial and Processing facilities.
-
UL Type TC Copper Tape Utility, Multi-Conductor, 600/1000 V
View Product: UL Type TC Copper Tape Utility, Multi-Conductor, 600/1000 VUL Type TC Copper Tape Utility, Multi-Conductor, 600/1000 V
Shawflex Utility cables are the ideal choice for applications requiring an extra level of durability and noise protection in utility applications.
-
UL Type TC Tray VFD, Multi-Conductor, 600/1000 V
View Product: UL Type TC Tray VFD, Multi-Conductor, 600/1000 VUL Type TC Tray VFD, Multi-Conductor, 600/1000 V
Shawflex VFD cables are the preferred power cables for AC Drives. These cables are primarily used between Pulse Width Modulation (PWM) inverters and AC motors. Tray cables are suitable for use in raceways, including ventilated, non-ventilated, indoor / outdoor and ladder-type cable trays in wet / dry locations and are applicable in Industrial and Processing facilities.
